Asphalt Driveway Resurfacing in Columbus, Ohio
Bruck Construction resurfaces worn asphalt driveways in Columbus and central Ohio by placing a new layer over a sound base, often after milling or patching. It costs less than a full tear-out when the base is good. You get a fast written quote, and the work is guaranteed for one year.
- Since 1984
- 4.7 on Google (70 reviews)
- A+ BBB rating
- Free estimates
- 1-year guarantee
Quick facts
| Who it is for | homeowners |
|---|---|
| Typical timeline | Usually one to two days on site |
| Typical lifespan | Often 10 to 20 years on a sound base with maintenance |
| Best season | Late spring through early fall |
| Guarantee | 1-year guarantee on all asphalt and concrete work |
| Service area | Columbus and central Ohio |
| Estimates | Free, in writing |
Signs you need it
- A surface that is rough, faded and cracked but still firm underfoot
- Raveling across most of the driveway
- Many narrow cracks and old patches, with no soft spots
- Shallow ponding that a thicker surface can correct
- A driveway you want to keep at the same elevation near the garage
- No alligator cracking or sunken areas, which would point to a base problem
Our process
- We inspect the surface and the base, and probe soft areas.
- We repair failed spots and fill larger cracks first.
- We clean the surface and apply a tack coat so the new layer bonds.
- We place hot-mix asphalt and roll it to compaction, keeping drainage and the garage apron in mind.
- We walk the finished surface with you and explain curing.
Options and materials
Overlay vs replacement
An overlay only works if the base is sound. Placing new asphalt over a failing base lets old cracks reflect through within a few winters.
Thickness
A resurfacing layer is commonly around 1.5 to 2 in. We check how that affects the garage threshold and drainage before we recommend it.
Milling first
Milling takes off the worn top layer so the new surface meets the existing height, which helps at garage doors, aprons and curbs.
Tack coat
A thin asphalt coating that bonds the new layer to the old. Skipped tack coat is a common cause of peeling and slipping.
Ohio freeze-thaw
Patch and fill before overlaying. Cracks that are left open carry water into the base.
What moves the price
Every job is priced after we see it. These are the factors that change the number:
- Square footage
- How much milling, patching or base repair is needed first
- Overlay thickness
- Grade, drainage and garage apron height
- Access for equipment
- Time of year
We measure, then put the scope, materials and price in a written estimate. Estimates are free.
“Had bruck do a tear out and replacement on my driveway. Pleasant to deal with from start to finish. Joe was awesome and communication was great. Driveway looks great! Highly recommended!!!”
Frequently asked questions
What is the difference between resurfacing and repaving?
Resurfacing puts a new layer over the existing base. Repaving removes the old asphalt and rebuilds the base. We recommend resurfacing only when the base is sound.
How long does a resurfaced driveway last?
It depends on the base and maintenance. A resurfaced driveway on a good base can last many years, and sealing and crack filling help.
Will resurfacing raise my driveway?
A bit, unless we mill first. We check the garage and the street apron so the new height works.
Can you resurface over alligator cracking?
Usually not. Alligator cracking means the base is failing, and cracks will come back through a new layer. We will recommend a full replacement instead.
When can I drive on it?
We tell you at the end of the job. In warm weather it is usually a couple of days. Avoid turning the steering wheel while stopped for the first few weeks.
Do I need to seal after resurfacing?
New asphalt needs time to cure before its first seal. See what to expect from your new asphalt.